WEETECH

High Voltage Tester

        The High Voltage Test Systems, test with voltages up to 5,000 VDC / 3,600 VAC which prepares them for future challenges in the railway industry, aerospace industry, defense industry and in the automotive industry. These test systems allow for continuity tests in the mOhm range, insulation measurements in the Giga-Ohm range as well as the measurement of components like resistors, capacitors, inductors and relays—ideal for tests of cables and harnesses in drive technology of highly-developed railway vehicles like high-speed trains as well as in the constantly growing area of e-mobility.

Programmable power/current supplies with up to 3 A and up to 5,000 VDC / 3,600 VAC. Various generators for high current applications up to 25 A available. Integration of high voltage generators with 500 VA and more enable test applications according to DIN EN 50343 (Railway applications—Rolling stock—Rules for installation of cabling) Up to 500,000 test points possible, efficient ETE 454 HV expansion units including separate power supply in various sizes and types.

Standardized high-voltage switching unit for easy integration of external safety circuits, e.g. light curtain, test cage, external generators for functional tests with up to 125 VDC / 250 VAC.

Supported test types:- Connection test / Short test / Component test / Insulation test / Electric strength test / Functional test of switches and push buttons / Functional test of relays / Component test with RLC meter.

Mid Voltage Tester

        The Mid Voltage System for the cable harness tester and the functional test can be ideally adjusted to the needs of the automotive industry, Aerospace industry, Defense Industry, electrical engineering and the medical device industry by combining different types of low voltage and high voltage generators as well as a RLC meter. High voltage generators up to 1,500 VDC / 1,060 VAC. External generators for functional tests up to 60 VDC / 25 VAC. RLC meter to measure any combination of resistance (R), inductance (L) and capacity (C) with programmable frequencies. Programmable current source up to 1 A. Extension to up to 6,656 test points with ETE 434 expansion units possible

Supported test types:- Connection test / Short test / Component test / Insulation test / Electric strength test / Functional test of switches and push buttons / Functional test of relays / Component test with RLC meter.

Low Voltage Tester

        The Low Voltage Systems is the optimal tester for automotive harnesses and electronic components. The operation through a Computer enables a clear programming of complex test scripts with the IVision Studio Software and an intuitive operation during the test run. During the AutoStart/CommandBlock modus, identified faults are tested continuously in the background and kept displayed until they have been solved. Extended functionality by switching external voltages up to 50 V. Expansion to up to 20,000 test points possible. Switching of voltages up to 50 V e.g. for the functional test of relays and electronic components, Exact measurement of current and voltage, Accurate measurement down to 20 mOhm with 4-terminal measurement down to 500 µOhm

Supported test types:- Connection test / Short test / Component test / Functional test of switches and push buttons /Functional test of relays