Railway
Sherborne Sensors Inclinometer
Sherborne Sensors high precision inclinometers measure horizontal and vertical angular inclination with virtually infinite resolution. Providing highly accurate tilt and inclination measurements for demanding military and industrial applications.
Digital inclinometers with total error band of less than 0.08 degrees over -20°C to +70°C, with the resolution of 0.001°
Suitable for use in a variety of industrial and military applications where high precision angular measurements are required, and in rugged and robust applications where high levels of vibration and mechanical shock up to 1250g may be encountered.
Analog inclinometer used in a variety of industrial and military applications where high precision angular measurements are required, and in rugged and robust applications where high levels of vibration and mechanical shock up to 1500g are encountered.
Resolution to 0.1arc second (0.00003°) High level 4 to 20mA output proportional to sine of the angle of tiltInclinometer Single Axis
Dual Axis Inclinometer
Digital Inclinometer
High Voltage Tester
The High Voltage Test Systems, test with voltages up to 5,000 VDC / 3,600 VAC which prepares them for future challenges in the railway industry, aerospace industry, defense industry and in the automotive industry. These test systems allow for continuity tests in the mOhm range, insulation measurements in the Giga-Ohm range as well as the measurement of components like resistors, capacitors, inductors and relays—ideal for tests of cables and harnesses in drive technology of highly-developed railway vehicles like high-speed trains as well as in the constantly growing area of e-mobility.
Programmable power/current supplies with up to 3 A and up to 5,000 VDC / 3,600 VAC. Various generators for high current applications up to 25 A available. Integration of high voltage generators with 500 VA and more enable test applications according to DIN EN 50343 (Railway applications—Rolling stock—Rules for installation of cabling) Up to 500,000 test points possible, efficient ETE 454 HV expansion units including separate power supply in various sizes and types.
Standardized high-voltage switching unit for easy integration of external safety circuits, e.g. light curtain, test cage, external generators for functional tests with up to 125 VDC / 250 VAC.
Supported test types:- Connection test / Short test / Component test / Insulation test / Electric strength test / Functional test of switches and push buttons / Functional test of relays / Component test with RLC meter.
Mid Voltage Tester
The Mid Voltage System for the cable harness tester and the functional test can be ideally adjusted to the needs of the automotive industry, Aerospace industry, Defense Industry, electrical engineering and the medical device industry by combining different types of low voltage and high voltage generators as well as a RLC meter. High voltage generators up to 1,500 VDC / 1,060 VAC. External generators for functional tests up to 60 VDC / 25 VAC. RLC meter to measure any combination of resistance (R), inductance (L) and capacity (C) with programmable frequencies. Programmable current source up to 1 A. Extension to up to 6,656 test points with ETE 434 expansion units possible
Supported test types:- Connection test / Short test / Component test / Insulation test / Electric strength test / Functional test of switches and push buttons / Functional test of relays / Component test with RLC meter.
Functional tester
