• Low Voltage Cable Tester
  • High Voltage Cable Tester
  • Functional Tester

Cable test can means the test of two wires in an antenna cable, or the test in an aeroplane with more than 1000.000 connecting points. The specification can also require the simple connection test or the high voltage test for insulation defects. When wiring is not correct you will face tremendous problems. Weetech makes sure that this doesnt happen and which can be detected at an early stage. This can be achieve with the WEETECH advanced test solution for cable, harness and Functional test products.

Despite the different conception for low cost and high performance testers, all WEETECH cable testers have one thing in common: they all can fit with the customer's special production environment, as often the integration in existing systems and courses is the real demand when using test systems. Weetech sets the standard in a very demanding niche market. Following this strategy WEETECH design its all test systems to the highest possible quality level by fine-tuning their own developed hardware and software.

No one else can offer a global presence like WEETECH in high-tech branches like Aerospace, Military, Automotive, Transport and countless other industries. WEETECH represented worldwide in more than 16 countries, some of them with their own subsidiaries. So we are proud to be there only representative in India.


WEETECH's Low Voltage Portable Test Solutions are designed for open, short, component and functional testing of cable and harness assemblies. These systems can be used as an assembly aid to assist in cable production and offer a remote control interface to drive peripheral devices, such as a feeder or an ejector mechanism. WEETECH's low voltage systems have the ability to network several testers at one time. Our world-renowned low voltage systems are fast, accurate, expandable and easy to use.

1) WK 140:- The premier choice for in-process and final test of computer cables as well as cabling of electrical appliances and wire harnesses. This easy-to-use system offers highly advanced capabilities and can be integrated into a PC network for central program management and storage of statistical test data.

Test & Measurement Performance Maximum Voltage of 12.5 VDC Constant Current of 10 A, 100 A, 1 mA, or 5 mA Continuity/Insulation Thresholds from 10 Ohms to 100 kOhms Resistor Test from 1 Ohm to 1 MOhm ( 5% 5 Ohms) Capacitor Test from 50 nF to 1,000 F ( 10% 20 nF) Diode Test for Open, Short and Reversed Insertion

Switching Matrix  • Maximum of 384 Test Points via 3 x 128-Test Point Cards • CMOS Analog Switching

Functional Test (With Optional FT Box) • Test of Keys and Switches, and Powered Devices such as Horns, Signals, Brake Lights, etc. • Capable of Switching an External Source up to 24 VDC

Hardware • Stand-Alone Unit (No PC Required) via a Micro-Controller at 20 MHz • 512 KB Static RAM Battery-Backed for 5 Years Minimum • Optional Ethernet Interface for TCP/IP Transfer with Defined IP Address • Two Parallel and Three Serial Interfaces (For Printer, Barcode Reader, etc.) • Interface for Remote Operation and Driving Peripheral Devices (Fixtures, Feeders, etc.) • Optional PC Card for Additional Test Program Storage



2) WK 240:- WK 240 A low voltage (12.5 VDC), portable, stand-alone system. Optional ethernet control and functional test available. Up to 1,024 test points.

Test & Measurement Performance: • Maximum Voltage of 12.5 VDC • Constant Current of 10 µA, 100 µA, 1 mA, or 5 mA • Continuity/Insulation Thresholds from 10 Ohms to 100 kOhms • Resistor Test from 1 Ohm to 1 MOhm (± 5% ± 5 Ohms) • Capacitor Test from 50 nF to 1,000 µF (± 10% ± 20 nF) • Diode Test for Open, Short and Reversed Insertion

Switching Matrix: • Maximum of 1,024 Test Points via 8 x 128-Test Point Cards • CMOS Analog Switching
Functional Test (With Optional FT Box) • Test of Keys and Switches, and Powered Devices such as Horns, Signals, Brake Lights, etc. • Capable of Switching an External Source up to 24 VDC

Hardware : • Stand-Alone Unit (No PC Required) via a Micro-Controller at 20 MHz • 512 KB Static RAM Battery-Backed for 5 Years Minimum • Optional Ethernet Interface for TCP/IP Transfer with Defined IP Address • Two Parallel and Three Serial Interfaces (For Printer, Barcode Reader, etc.) • Interface for Remote Operation and Driving Peripheral Devices (Fixtures, Feeders, etc.) • Optional PC Card for Additional Test Program Storage



1) W 434:- W 434 A high voltage (1,500 VDC & 1,060 VAC), portable, cable test system. Up to 1,664 test points. Offers a built-in RLC meter as an optional.

Test & Measurement Performance : • High Voltage Isolation Test up to 1,500 VDC (12-Bit Resolution) • Constant Current of 0 - 1 A • AC Arc-Detection Test up to 1,060 VAC • Two Terminal Measurement down to 1 Ohm (2 % + 2 mOhms) • Four Terminal Measurement down to 10 mOhms (± (2 % + 2 mOhms)) • Insulation Test :-up to 100 MOhms ± 10 %, up to 50 MOhms ± 5% • Resistor Test:- from 10 MOhm to 500 MOhm, accuracy ± 2% • Diode and Zener Diode Test:- for Open, Short and Reversed Insertion • Transistor Test • Test of Keys and Switches • Functional Test Including External Programmable Voltages up to 25 VAC / 60 VDC • External Voltage Measurement up to ± 500 V (DC to 1kHz)

RLC Meter : • Fast, Accurate and Safe Component Network Measurement • Automatic Determination of Serial or Parallel RL / RC Networks • 0 - 5 Vpp, DC to 100 kHz • Twisted Pair / Shielded Cable Test from 100 pF to 1 μF ± (5 % + 5 pF) • Capacitor Test from 1 μF to 10 mF ± 5% • Inductance Test from 1 μH to 1 H ± 10%

Hardware: • Ethernet Interface for Instant Connection to a PC • Optional Remote Control Interface for Driving Peripheral Devices (Fixtures, Feeders, etc.) • Extensive Selection of Output Connectors are Available Upon Request


2) W 444:-Frequently used to test safety-related cable harnesses in the aerospace, military, transportation and automotive industries, this system features powerful measurement technology, current source up to 3 A, voltage up to 2,250 VDC / 1,500 VAC, and a built-in RLC Meter.

Test & Measurement Performance : • High Voltage Isolation Test up to 2,250 VDC (12-Bit Resolution) • Constant Current of 0 - 3 A • AC Arc-Detection Test up to 1,500 VAC • Two Terminal Measurement down to 1 Ohm (± 1% ± 0.5 Ohms) • Four Terminal Measurement down to 3 mOhms (± 1% ± 0.3 mOhms) • Insulation Test up to 500 MOhms (± 1%), up to 10 GOhms (± 3%) • Resistor Test from 3 mOhms to 10 MOhms (± 1% ± 0.3 mOhms) • Diode and Zener Diode Test for Open, Short and Reversed Insertion • Transistor Test • Test of Keys and Switches • Functional Test Including External Programmable Voltages up to 25 VAC / 60 VDC • External Voltage Measurement up to ± 500 V (DC to 1kHz)
RLC Meter : • Fast, Accurate and Safe Component Network Measurement • Automatic Determination of Serial or Parallel RL / RC Networks • 0 - 5 Vpp, DC to 100 kHz • Twisted Pair / Shielded Cable Test from 10 pF to 1 µF (±1% ± 2 pF) • Capacitor Test from 1 µF to 10,000 µF (± 2%) • Inductance Test from 1 µH to 1 H (± 2%)
• Additional Measurement Capabilities Include: Impedance, Admittance, Phase Angle, Resistance (Serial or Parallel), Capacitance (Serial or Parallel), Inductance (Serial or Parallel), etc.

Hardware: • Ethernet Interface for Instant Connection to a PC • Optional Remote Control Interface for Driving Peripheral Devices (Fixtures, Feeders, etc.) • Extensive Selection of Output Connectors are Available Upon Request


3) W 454:-The premier choice for high-end test parameters of cable assemblies and components for the aerospace, military, medical and transportation industries. The W 454 features high voltage up to 4,400 VDC and 3,200 VAC, as well as current up to 3 A. This system can distribute test points in smaller external matrix cases and offers adapter cable ID for instant recognition of device under test (DUT) insertion. Functional testing of program power, electronic controls and sub-assemblies is available.

Test & Measurement Performance: • High Voltage Isolation Test up to 4,400 VDC (100 V/ms, 1,000 V/ms, 500 V/s, Programmable from 25 to 200 V/s)
• AC Arc-Detection Test up to 3,200 VAC • Constant Current of 0 - 3 A • Two Terminal Measurement down to 1 Ohm (± 1% ± 0.5 Ohms) • Four Terminal Measurement down to 3 mOhms (± 1% ± 0.3 mOhms) • Insulation Test up to 500 MOhms (± 1%), up to 10 GOhms (± 3%) • Resistor Test from 3 mOhms to 10 MOhms (± 1% ± 0.3 mOhms) • Diode and Zener Diode Test for Open, Short and Reversed Insertion • Transistor Test

Functional Test: • Test of Keys and Switches • External Programmable Voltages up to 250 VAC / 125 VDC • Power Modules up to 3 A (25 VAC / 60 VDC) • External Voltage Measurement up to ± 500 V (DC to 1kHz) • Fiber Optics Test (Optional) • Optical Test Points can be Integrated Anywhere Within the Distributed Matrix • Each 19-Inch Unit (4U) Contains up to 64 Fiber Optic Test Points • Bi-Directional Measurement Without Disconnecting Allows each Point to act as Sender, Receiver, Monitor Receiver, and Receiver for Reflection Measurement • Insertion Loss and Return Loss can be Measured Separately • Measurement Time Between 200 ms and 500 ms Depending on Repeatability
• Utilizes the FC Optical Output Connecto • Testing of Wave Lengths from 800 nm to 1,300 nm • Repeatability at 30 dB is ± 0.05 dB (24-Bit Resolution)

RLC Meter: • Fast, Accurate and Safe Component Network Measurement • Automatic Determination of Serial or Parallel RL / RC Networks • 0 - 5 Vpp, DC to 100 kHz • Twisted Pair / Shielded Cable Test from 10 pF to 1 µF (±1% ± 2 pF) • Capacitor Test from 1 µF to 10,000 µF (± 2%) • Inductance Test from 1 µH to 1 H (± 2%)


Hardware: • Ethernet Interface for Instant Connection to a PC (Includes Interface Cable) • Unlimited Number of Test Points • Extensive Selection of Output Connectors are Available Upon Request • Optional Remote Control Interface for Driving Peripheral Devices (Fixtures, Feeders, etc.)


WEETECH's Functional Test Solutions are designed to test electronic controls and subassemblies such as cockpits, dashboards and various control panels. Our functional solutions operate external input devices including power supplies and function generators, and output devices including multi-meters, oscilloscopes and electronic loads. Our world-renowned functional test systems are fast, accurate, expandable, and easy to use.

1) W 454:-
The premier choice for high-end test parameters of cable assemblies and components for the aerospace, military, medical and transportation industries. The W 454 features high voltage up to 4,400 VDC and 3,200 VAC, as well as current up to 3 A. This system can distribute test points in smaller external matrix cases and offers adapter cable ID for instant recognition of device under test (DUT) insertion. Functional testing of program power, electronic controls and sub-assemblies is available.

Test & Measurement Performance : • High Voltage Isolation Test up to 4,400 VDC (100 V/ms, 1,000 V/ms, 500 V/s, Programmable from 25 to 200 V/s)
• AC Arc-Detection Test up to 3,200 VAC • Constant Current of 0 - 3 A • Two Terminal Measurement down to 1 Ohm (± 1% ± 0.5 Ohms) • Four Terminal Measurement down to 3 mOhms (± 1% ± 0.3 mOhms) • Insulation Test up to 500 MOhms (± 1%), up to 10 GOhms (± 3%) • Resistor Test from 3 mOhms to 10 MOhms (± 1% ± 0.3 mOhms) • Diode and Zener Diode Test for Open, Short and Reversed Insertion • Transistor Test

Functional Test: • Test of Keys and Switches • External Programmable Voltages up to 250 VAC / 125 VDC • Power Modules up to 3 A (25 VAC / 60 VDC) • External Voltage Measurement up to ± 500 V (DC to 1kHz)

Fiber Optics Test (Optional): • Optical Test Points can be Integrated Anywhere Within the Distributed Matrix • Each 19-Inch Unit (4U) Contains up to 64 Fiber Optic Test Points • Bi-Directional Measurement Without Disconnecting Allows each Point to act as Sender, Receiver, Monitor Receiver, and Receiver for Reflection Measurement • Insertion Loss and Return Loss can be Measured Separately • Measurement Time Between 200 ms and 500 ms Depending on Repeatability • Utilizes the FC Optical Output Connector • Testing of Wave Lengths from 800 nm to 1,300 nm • Repeatability at 30 dB is ± 0.05 dB (24-Bit Resolution)


RLC Meter : • Fast, Accurate and Safe Component Network Measurement • Automatic Determination of Serial or Parallel RL / RC Networks • 0 - 5 Vpp, DC to 100 kHz • Twisted Pair / Shielded Cable Test from 100 pF to 1 μF ± (5 % + 5 pF) • Capacitor Test from 1 μF to 10 mF ± 5% • Inductance Test from 1 μH to 1 H ± 10%

Hardware: • Ethernet Interface for Instant Connection to a PC (Includes Interface Cable) • Unlimited Number of Test Points • Extensive Selection of Output Connectors are Available Upon Request • Optional Remote Control Interface for Driving Peripheral Devices (Fixtures, Feeders, etc.)

Dimensions & Weight :• 19-inch Rack-Mount System on Wheels, up to 39 HU

Customized Height and Available Multi-Bay Configurations